background image

4 - English

SANDER SAFETY WARNINGS

 

Hold power tool by insulated gripping surfaces, when 
performing an operation where the cutting accessory 
may contact hidden wiring. 

Cutting accessory contact-

ing a “live” wire may make exposed metal parts of the 
power tool “live” and could give the operator an electric 
shock. 

 

Know your power tool. Read operator’s manual care-
fully. Learn its applications and limitations, as well as 
the specific potential hazards related to this power 
tool. 

Following this rule will reduce the risk of electric 

shock, fire, or serious injury.

 

Always wear eye protection with side shields marked 
to comply with ANSI Z87.1 when assembling parts, 
operating the tool, or performing maintenance.

 Fol-

lowing this rule will reduce the risk of serious personal 
injury.

 

Protect your lungs. Wear a face or dust mask if the 
operation is dusty. 

Following this rule will reduce the risk 

of serious personal injury.

 

Protect your hearing. Wear hearing protection during 
extended periods of operation.

 Following this rule will 

reduce the risk of serious personal injury.

 

Battery tools do not have to be plugged into an elec-
trical outlet; therefore, they are always in operating 
condition. Be aware of possible hazards when not 
using your battery tool or when changing accessories. 

Following this rule will reduce the risk of electric shock, 
fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 
or heat. 

This will reduce the risk of explosion and possibly 

injury.

  

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

Batteries can explode in the presence of a source 
of ignition, such as a pilot light. 

To reduce the risk of 

serious personal injury, never use any cordless product 
in the presence of open flame. An exploded battery can 
propel debris and chemicals. If exposed, flush with water 
immediately.

 

Do not charge battery tool in a damp or wet location. 
Do not use, store, or charge battery packs or products 
in locations where the temperature is less than 50°F 
or more than 100°F. 

Do not store outside or in vehicles

.

 

Under extreme usage or temperature conditions, bat-
tery leakage may occur. If liquid comes in contact with 
your skin, wash immediately with soap and water. If 
liquid gets into your eyes, flush them with clean water 
for at least 10 minutes, then seek immediate medical 
attention. 

Following this rule will reduce the risk of seri-

ous personal injury.

  

Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this tool. If you 
loan someone this tool, loan them these instructions also.

Summary of Contents for DE18





























Reviews: