background image

7

English

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

 

„

Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed. 

Use of the power tool for operations different from 

those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

 

„

Recharge only with the charger specified by the 

manufacturer. A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 

another battery pack.

 

„

Use power tools only with specifically designated 

battery packs. Use of any other battery packs may 

create a risk of injury and fire.

 

„

When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. Shorting the 

battery terminals together may cause burns or a fire.

 

„

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help. Liquid ejected from the 

battery may cause irritation or burns.

SERVICE

 

„

Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.

SPECIFIC SAFETY RULES

 

 WARNING

The product is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or 

instruction concerning use of the product by a person 

responsible for their safety.
Children should be supervised to ensure that they do 

not play with the product.

 

„

Check hoses for weak or worn condition before each 

use, making certain all connections are secure. Do not 

use if defect is found. Purchase a new hose or notify 

an authorized service center for examination or repair.

 

„

Release all pressures within the system slowly. Dust 

and debris may be harmful.

 

„

Never point any inflator toward yourself or others.

 

„

Do not exceed the pressure rating of any component 

in the system.

 

„

Protect material lines and air lines from damage or 

puncture. Keep hose and power cord away from sharp 

objects, chemical spills, oil, solvents, and wet floors.

 

„

Do not preset inflator to result in output pressure 

greater than marked maximum pressure of item to be 

inflated. Do not use at pressure greater than 150 PSI.

 

„

Inspect unit for cracks, pin holes, or other imperfections 

that could cause inflator to become unsafe. Never cut 

or drill holes in the inflator.

 

„

Make sure the hose is free of obstructions or snags. 

Entangled or snarled hoses can cause loss of balance 

or footing and may become damaged.

 

„

Use the inflator only for its intended use. Do not alter 

or modify the unit from the original design or function.

 

„

Always be aware that misuse and improper handling 

of this inflator can cause injury to yourself and others.

 

„

Do not continue to use inflator or hose that leaks air or 

does not function properly.

 

„

Do not attempt to pull or carry the inflator by the hoses.

 

„

Always follow all safety rules recommended by the 

manufacturer of your inflator, in addition to all safety 

rules for the inflator. Following this rule will reduce the 

risk of serious personal injury.

 

„

Do not use inflator as a breathing device.

 

„

Never direct a jet of compressed air toward people or 

animals. Take care not to blow dust and dirt towards 

yourself or others. Following this rule will reduce the 

risk of serious injury.

 

„

Do not use this inflator to spray chemicals. Your lungs 

can be damaged by inhaling toxic fumes.

 

„

Carefully monitor objects during inflation.

 

„

To reduce the risk of over inflation, use a reliable 

pressure gauge periodically during inflation. The 

pressure gauge on the inflator is for reference only and 

is therefore not binding for exact values.

 

„

Never leave the inflator unattended during inflation.

 

„

Allow pump to cool for 10 minutes after each 10 

minutes of continuous use. Never block the inflating or 

deflating outlets while operating.

SPECIFICATIONS

Voltage

18 V

High pressure hose length

711 mm

Low pressure hose length

356 mm

Maximum pressure

150 PSI, 10.3 BAR, 1030 kPa

Weight

1.27 kg

Summary of Contents for CIT1800G













Reviews: