Ryobi CDI-1801M, Owner'S Operating Manual

Page: 6 / 22

OPERATION
TO INSTALL BATTERY PACK (NOT INCLUDED) (Fig.2)
Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
Place battery pack in your drill. Align raised rib on
battery pack with groove inside drill.
Make sure the latches on battery pack snap in place
and battery pack is secured in drill before beginning
operation.
TO REMOVE BATTERY PACK(NOT INCLUDED) (Fig.2)
Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
Locate latches of battery pack and depress to release
battery pack from your drill.
Remove battery pack from your drill.
ADJUSTING THE AUXILIARY HANDLE (Fig. 3)
Follow these steps to adjust the auxiliary handle.
Loosen the auxiliary handle by turning the knob
counterclockwise.
Rotate the auxiliary handle to the desired location.
Tighten the auxiliary handle securely by turning the
knob clockwise.
2
English
SPECIFICATIONS
CDI-1802M
18 V
13
Single
Variable speed
0 - 400
0 - 1400
0 - 5200
0 - 18200
35
BPP-1817M/
BPP-1815M
BC-1800/
BC-1815S
CDI-1801M
18 V
13
Two
Variable speed
0 - 400
0 - 1400
0 - 5200
0 - 18200
35
BPP-1817M/
BPP-1815M
BC-1800/
BC-1815S
Model
Voltage
Chuck (mm)
Chuck sleeve
Switch
No load speed (drill mode):
-Lo speed (min-
1)
-Hi speed (min- 1)
No load speed (impact mode):
-Lo speed (min-
1)
-Hi speed (min- 1)
Max.Torque (Nm)
Battery pack (Not included):
Charger (Not included)
GENERAL SAFETY RULES
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed.
Use of the power tool for
operations different from intended could result in
a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Ensure the switch is in the off position before
inserting battery pack.
Inserting the battery pack into
power tools that have the switch on invites accidents.
b) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
c) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
d) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fire.
e) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
7) SPECIAL RULES
a) Wear ear protectors with impact drills.
Exposure
to noise can cause hearing loss.
b) Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
DESCRIPTION
1. Keyless chuck
2. Switch trigger
3. Direction of rotation selector (Forward/Reverse)
4. Screwdriver bits
5. Magnetic tray
6 . Battery pack (NOT INCLUDED)
7.
Latches
8. Auxiliary Handle
9. Depth Gauge Rod
10. Torque adjusting Ring
11. Drill mode
12. Impact mode
13. Reverse
14. Forward
15. Chuck jaws