Brushless Impact DrIver 20v 1/4” 200Nm -
BoDy oNly
model no:
cp20vIDX
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
1.1.
GeNeral safety
9
maintain the Impact driver and battery in good condition. Check moving parts alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only.
Unauthorised parts may be
dangerous and will invalidate the warranty.
9
ensure the Impact driver is switched off before installing the battery pack.
9
Keep the Impact driver and charger clean for best and safest performance.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Evaluate your working area before using the Impact Driver; e.g. ceilings, floors and enclosures may contain electrical items or water
piping.
9
ensure battery pack is correctly inserted into the Impact driver handle and latched in place before attempting to switch on Impact
driver.
9
Secure loose work pieces with a clamp, vice or other adequate holding device.
9
Avoid unintentional starting.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
maintain correct balance and footing. ensure the floor is not slippery and wear non-skid shoes.
9
Keep direction switch in the locked position until the Impact driver
is required for use.
9
Keep children and unauthorised persons away from the working area.
8
Do Not
use the Impact Driver where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
Do Not
allow children to operate the Impact driver.
8
Do Not
operate the Impact driver
if any parts are missing as this may cause failure and/or personal injury.
8
Do Not
hold unsecured work piece in your hand.
8
Do Not
leave the Impact driver operating unattended.
8
Do Not
carry the Impact driver with your finger on the power switch. Keep chuck direction switch in the locked position.
8
Do Not
use the Impact driver for a task it is not designed to perform.
8
Do Not
operate the Impact driver
when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do Not
get the Impact driver or battery charger wet or use in damp or wet locations.
2. INtroDuctIoN
T
he 20V Series has been designed to suit users from the DIY enthusiast to the professional. These body only tools offer a one battery fits all
solution with a choice of 20V lithium batteries ranging from 2Ah to 4Ah, meaning costs can be kept down whilst quality remains high. Quality,
stylish, lightweight tools with durable composite housing and a soft grip making them comfortable and easy to use.
3. specIfIcatIoN
model No.. ..................................................................... cp20vIDX
Battery .....................................
(not included) 20V 2Ah - 4Ah Li-ion
drive .................................................................................
1/4” Hex.
Impact rate .................................................................... 0-3780bpm
no load Speed .................................................................. 2700rpm
m
aximum Torque
.................................................................200nm
nett Weight: ..........................................................................1.25kg
noise power .......................................................................
80dB(A)
noise pressure ...................................................................
69dB(A)
Vibration .......................................................................... 3.051m/s²
Uncertainty .......................................................................... 1.5m/s²
Battery model No’s
2Ah ........................................................
(not included)
cp20vBp2
3Ah .........................................................
(not included)
cp20vBp3
4Ah .........................................................
(not included)
cp20vBp4
mains charger model No ..................... (not included) cp20vmc
CP20VIdX | Issue 1 12/06/2019
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
