Sealey SA5/S.V2, Instructions

Page: 1 / 2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3 Follow all Health & Safety and general workshop rules, regulations and conditions when using the wrench.
p WARNING! Disconnect from air supply before changing accessories or servicing.
3 Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
p WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use
and ensure that all connections are secure.
3 Only use impact sockets which are specifically designed for use with an impact wrench.
3 Wear approved safety eye/face shield, ear defenders and hand protection.
p WARNING! Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
3 Maintain correct balance and footing. Ensure that the floor is not slippery and wear non-slip shoes.
3 Keep children and non-essential persons away from the work area.
7 DO NOT use the wrench for a task that it is not designed to perform.
p
p
WARNING! DO NOT use wrench if damaged or thought to be faulty (contact your Service Agent).
7 DO NOT use wrench unless you have been instructed in its use by a qualified person.
7 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7 DO NOT operate the wrench if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
7 To avoid unintentional starting DO NOT carry the wrench with your finger on the trigger.
7 DO NOT direct air from the air hose at yourself or others.
3 When not in use, disconnect from the air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR
1/2” SQ. DRIVE EXTRA HEAVY
DUTY AIR IMPACT WRENCH
Model:
SA5/S.V2
PARTS LIST FOR MODEL
SA5/S.V2
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
01284 703534
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group , Bury St. Edmunds, Suffolk.
2. INTRODUCTION & SPECIFICATION
Drive . . . . . . . . . . . . . . . . . . . . . . . .1/2”sq
Working/Max Torque . . . . . . . .420/520lb.ft
Ultimate Torque . . . . . . . . . . . . . . . 600lb.ft
Air Consumption . . . . . . . . . . . . . . . .4cfm
Operating Pressure . . . . . . . . . . . . . .90psi
Air Inlet . . . . . . . . . . . . . . . . . . . . .1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . . . .2.7kg
Noise . . . . . . . . . . . . . . . . . . . . . .95.5dBA
Vibration . . . . . . . . . . . . . . . . . . . . . .5m/s
2
2.1. Introduction
Fitted with power-pin type clutch giving up to 50% better performance than standard rocking-dog
clutches. Suitable for heavy garage and tyre shop use. Features 4-position adjustable air/torque
control, reversible action and spring balance anchorage point.
Issue: 1
Date Issued: 021202
Item Part No. Description
1 SA5S/01 Oil Seal
2 SA5S/02 Cap Screw
3 SA5S/03 Spring Washer
4 SA5S/04 Hammer Case
5 SA5S/05 Front Gasket
6 SA5S/06 Anvil Bushing
7 SA5S/07 Spacer
8 SA5S/08 O-Ring
9 SA5S/09 Anvil Collar
10 SA5S/10 Anvil
11 SA5S/11 Spring
12 SA5S/12 Hammer Pin
13 SA5S/13 Cam
14 SA5S/14 Steel Ball
15 SA5S/15 Cam Base
16 SA5S/16 Hammer Cage
17 SA5S/17 Reverse Valve
18 SA5S/18 Valve Sleeve
Item Part No. Description
37 SA5S/37 O-Ring
38 SA5S/38 Front End Plate
39 SA5S/39 Spring Pin
40F SA5S/40 Cylinder
41 SA5S/41 Spring Pin
42 SA5S/42 Rotor
43 SA5S/43 Rotor Blade
44F SA5S/44 Rear End Plate
45 B/6201Z Bearing
46 SA5S/46 Rear Gasket
47 SA5S/47 Rear Cover
48 SA5S/48 Cap Screw
49 SA5S/49 Protector, Rubber
50 SA5S.V2-50 Protector, Rubber
51E SA5S.V2-51 Spring
52E SA5S.V2-52 Steel Ball
SA5/S.V2 - 1 - 021202
Item Part No. Description
19 SA5S/19 Trigger
20 SA5S/20 Spring Pin
21 SA5S/21 Set Screw
22F SA5S/22 Motor Housing
23 SA5S/23 O-Ring
24F SA5S/24 Regulator
25 SA5S/25 Spring Pin
26 SA5S/26 O-Ring
27 SA5S/27 Valve Stem
28 SA5S/28 Bushing
29 SA5S/29 Steel Ball
30 SA5S/30 Spring
31 SA5S/31 Air Inlet
32 SA5S/32 Pin
33 SA5S/33 Spring
34 SA5S/34 Set Screw
35 B/6001Z Bearing
36 SA5S/36 Oil Seal
e-mail
Web
2.2. Specification