Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
SA299.V2 - 1 - 140705
PARTS INFORMATION FOR:
1” AIR IMPACT WRENCH
MODEL:
SA299.V2
INSTRUCTION MANUAL FOR:
1” AIR IMPACT WRENCH
MODEL:
SA299.V2
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12
months from purchase date. proof of which will be required for any claim.
INFORMATION:
Call us for a copy of our latest catalogue
and promotions on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group
, Bury St. Edmunds, Suffolk.
2.
INTRODUCTION & SPECIFICATIONS
Drive size . . . . . . . . . . . . . . . . . . .1”Sq
Air inlet size . . . . . . . . . . 1/2” BSP
Working/Max torque . . . .1170/1460ft.lb
Ultimate torque . . . . . . . . .1520ft.lb
Operating pressure . . . . . . . . . . .90psi
Air consumption . . . . . . . . . 15cfm
Weight . . . . . . . . . . . . . . . . . . . 13.0kg
Vibration level . . . . . . . . . .1.9m/s
2
Sound pressure . . . . . . . . . . . . . .86dB
Sound Power . . . . . . . . . . . .98dB
Tough ‘straight line’ Impact Wrench fitted with side handle and incorporating reverse action.
Issue : 1
Date : 140705
ITEM PART NO
DESCRIPTION
1
SA29.V3-01
OIL SEAL
2
SA29.V3-02
HOUSING
3
SA29.V3-03
SCREW
4
SA29.V3-04
WASHER
5
SA29.V3-05
WASHER
6
SA29.V3-06
SCREW
7
SA29.V3-07
HANDLE
8
SA29.V3-08
SEAL PLATE
9
SA29.V3-09
BUSHING
10
SA29.V3-10
RETAINER RING
11
SA29.V3-11
O-RING
12
SA299.V2-12
ANVIL
13
SA29.V3-13
HAMMER PIN
14
SA29.V3-14
HAMMER
15
SA29.V3-15
DRIVE CAM
16
SA29.V3-16
HAMMER CAGE
17
B/6208ZZ
BEARING, 6208ZZ
18
SA29.V3-18
HOUSING
ITEM PART NO
DESCRIPTION
19
SA29.V3-19
NUT
20
SA29.V3-20
NUT
21
SA29.V3-21
O-RING
22
B/6205ZZ
BEARING, 6205ZZ
23
SA29.V3-23
FRONT PLATE
24
SA29.V3-24
SET PIN
25
SA29.V3-25
CYLINDER
26
SA29.V3-26
ROTOR
27
SA29.V3-27
VANE
28
SA29.V3-28
SET PIN
29
SA29.V3-29
OIL SEAL
30
SA29.V3-30
REAR COVER
31
SA29.V3-31
SCREW
32
SA29.V3-32
TRIGGER
33
SA29.V3-33
SET PIN
34
SA29.V3-34
SET PIN
35
SA29.V3-35
BRASS SLEEVE
36
SA29.V3-36
PLUNGER
ITEM PART NO
DESCRIPTION
37
SA29.V3-37
SET PIN
38
SA29.V3-38
SPRING
39
SA29.V3-39
STEEL BALL
40
SA29.V3-40
SET PIN
41
SA29.V3-41
O-RING
42
SA29.V3-42
SWITCH
43
SA29.V3-43
SLEEVE
44
SA29.V3-44
PIN
45
SA29.V3-45
O-RING
46
SA29.V3-46
CUP PLUG
47
SA29.V3-47
PLUG
48
SA29.V3-48
SPRING
49
SA29.V3-49
O-RING
50
SA29.V3-50
AIR INLET
51
SA29.V3-51
INLET SCREW
52
SA29.V3-52
REAR COVER
!
WARNING!
Ensure health & safety, local authority, and
general workshop practice regulations are adhered to
when using this equipment.
!
WARNING!
Disconnect from air supply before changing
accessories or servicing.
"
Maintain the wrench in good condition and replace
any damaged or worn parts.
Use
g e n u i n e pa r ts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
!
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
"
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
"
Only use impact sockets which are specifically designed for use with an impact wrench.
"
Wear approved safety eye/face shield, ear defenders, and hand protection.
!
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
"
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
"
Keep children and non essential persons away from the working area.
#
DO NOT use the wrench for a task it is not designed to perform.
!
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
#
DO NOT use wrench unless you have been instructed in its use by a qualified person.
#
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
#
DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating medication.
#
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
#
DO NOT direct air from the air hose at yourself or others.
"
When not in use disconnect from air supply and store in a safe, dry, childproof location.
52
