Ryobi BID1821, Owner'S Operating Manual

Page: 6 / 9

3
English
CHARGER SAFETY
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on
charger.
b. That extension cord is properly wired and in good
electrical condition.
■
Do not operate charger with a damaged cord or
plug. If damaged, have it replaced immediately by a
qualified serviceman.
■
Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take
it to a qualified serviceman.
■
Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
■
To reduce risk of electric shock, unplug the charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this risk.
■
Disconnect charger from power supply when not in
use.
■
Risk of electric shock. Do not touch uninsulated
portion of output connector or uninsulated battery
terminal.
■
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
unit. If you loan someone this unit, loan them these
instructions also.
SPECIFICATIONS
Voltage 18 V
Coupler 6.35 mm
Switch Variable speed
No load speed 0 - 2600 min-
1
Max. Torque 170 Nm
Blows Per Minute 0-3200 BPM
Weight (not included battery pack) 1.24 Kg
MODEL
BATTERY
PACK
(not included)
COMPATIBLE
CHARGER
(not included)
BID1821
BPL-1820
BPL-1815
BCL-1800
BCS618
ABP1801
ABP-1815
BCL-1800
BCS618
ACR1800
260022029
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to
do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
■
Fastening/removing screws and bolts.
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium
battery packs.
WARNING
Always remove battery pack from your impact
driver when you are assembling parts, making
adjustments, assembling or removing bits,
cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could
cause serious personal injury.
BATTERY PROTECTION FEATURES
Ryobi 18 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximise
battery life. Under some operating conditions, these
built-in features may cause the battery and the tool it is
powering to act differently from nickel-cadmium batteries.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to
stop running. To reset the battery and tool, release the
trigger and resume normal operation.
NOTE: To prevent further shut down of the battery, avoid
forcing the tool.
If releasing the trigger does not reset the battery and
tool, the battery pack is depleted. If depleted, the battery
pack will begin charging when placed on the lithium-ion
charger.
BID1821_SAA-v4.indd 3 22/01/2010 6:19 PM