5
English
OPERATION
DRIVING OR REMOVING SCREWS
See Figures 5 - 6.
■
Place the direction of rotation selector in the correct
position for the operation.
■
Hold the impact driver with one hand.
■
Place the bit on the screw head and slowly depress
the trigger switch. Start the bit slowly for more control.
■
As the screw is driven, impacting will begin.
MAINTENANCE
WARNING:
When servicing, use only identical Ryobi
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses
with side shields during power product operation
or when blowing dust. If operation is dusty, also
wear a dust mask.
WARNING:
To avoid serious personal injury, always remove
the battery pack from the product when cleaning
or performing any maintenance.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleumbased products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.
BID1821_SAA-v4.indd 5
22/01/2010 6:19 PM
Summary of Contents for BID1821
Page 1: ...BID1821 CORDLESS IMPACT DRIVER OWNER S OPERATING MANUAL ...
Page 9: ......