background image

8

WARNING: 

If any parts are damaged or missing do not operate this 
tool  until  the  parts  are  replaced.  Failure  to  heed  this 
warning could result in serious personal injury.

WARNING: 

Do not attempt to modify this tool or create accessories 
not  recommended  for  use  with  this  tool.  Any  such 
alteration or modification is misuse and could result in a 
hazardous condition leading to possible serious personal 
injury.

WARNING:

To prevent accidental starting that could cause serious 
personal injury, always remove the batteries from the tool 
when assembling parts.

FEATURES

KNOW YOUR AIRGRIP EZ REACH™ POWERED 
LIGHT BULB CHANGER

See Figure 1.

The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual as 
well as a knowledge of the project you are attempting. Before 
use  of  this  product,  familiarize  yourself  with  all  operating 
features and safety rules.

ADJUSTABLE EXTENSION POLE

The adjustable extension pole included with your EZ Reach 
fully extends to 6 ft. for out of reach light bulbs.

AIRGRIP

 VACUUM TECHNOLOGY 

The AIRgrip System creates a vacuum seal to securely hold 
almost any light bulb.

CLUTCH CONTROL

A pre-set clutch control regulates the amount of pressure put 
on the light bulb, preventing damage or breakage.

REMOTE CONTROL

Buttons on the remote control allow the operator to grip, 
release, install, and remove a light bulb. The remote control 
can be conveniently attached to the stick driver or extension 
pole using the hook-and-loop pad.

STICK DRIVER

The stick driver’s articulating head can be positioned for easy 
access to the light bulb. The motorized stick driver rotates 
the suction head to either install or remove the light bulb.

SUCTION HEADS

Two suction heads are provided for use with different sized 
light bulbs.

ASSEMBLY

UNPACKING

This product requires assembly.

  Carefully remove the tool and any accessories from the 

box. Make sure that all items listed in the packing list are 
included.

  Inspect the tool carefully to make sure no breakage or 

damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-525-2579 for assistance.

PACKING LIST

Stick Driver
Adjustable Extension Pole
AIRgrip System
Hook-and-Loop Pad
Remote Control
Screws (2)
Storage Rack
Suction Head (2)
Wall Anchors (2)
9 Volt Battery (3)
Operator’s Manual

Summary of Contents for AIRGRIP EZ REACH ELB001















Reviews: