3.3
Transferring Sealer from a Drum
(Transfer kit sold separately)
1.
Insert the transfer tube into the barrel’s 2” NPT opening
.
2.
Connect the female camlock on the 15’ transfer hose to the transfer tube.
3.
Disconnect the female camlock on the pump intake (ensure that the tank outlet valve is closed by
making sure the valve handle is in the upright position).
4.
Connect the female camlock on the other end of the 15’ transfer hose to the pump intake and turn the
pump valve so that the handle is pointed towards the tank (see diagram below).
5.
Start the engine and pump the sealer from the drum to the tank.
Make sure to open the barrel vent
before starting. If the vent is closed a
vacuum will form inside the barrel.
Summary of Contents for RA-SSY-0002
Page 2: ......