5
T
ROUBLESHOOTING
Please be sure to read the Operation and Maintenance sections of this manual. Some common questions are
covered in Table B below.
5.1
T
able
B: T
roubleshooting
G
uide
Description of Problem
Possible Causes
Solution Procedure
Sealer is leaking from
connection of pump to engine.
Seals have worn out.
Disassemble pump housing
and replace main seal.
Pump is not circulating sealer. Pump has lost prime due to low
volume of sealer in tank.
Settled sealer has created a
blockage at bottom of tank.
Add sealer or water to tank.
Add water and agitate sealer to
mix.
Low spray pressure.
Pump has lost prime due to low
volume of sealer in tank.
Settled sealer has created a
blockage at bottom of tank.
Filter kit has a blockage.
Spray wand or hose has a
blockage.
Incorrect type of sealer is being
used with the system.
Add sealer or water to tank.
Add water and agitate sealer to
mix.
Remove filter kit and clean
strainer.
Disconnect spray wand and
hose, flush both with water.
Verify that the sealer being
used has no additives or
polymers.
Sealer is foaming during
circulation.
Circulation cycle is too long.
Incorrect type of sealer is being
used with the system.
Reduce circulation time to 2-3
minutes.
Verify that the sealer being
used has no additives or
polymers.
Summary of Contents for RA-SSY-0002
Page 2: ......
