Warning
⚠
A flame out valve bypass (RC-CAP-0008) has been provided with this product (shown below).
⚠
This cap can be used to temporarily bypass the flameout valve and keep the burner running in the event of a
thermocouple failure. It is designed for emergency use only and should be removed immediately upon work
completion.
⚠
***USE OF THIS BYPASS IS AT YOUR OWN RISK***
⚠
***DO NOT LEAVE THE EQUIPMENT UNATTENDED WHILE BYPASS INSTALLED***
⚠
Read all instructions and warnings in this manual before attempting to operate this equipment.
⚠
This equipment is designed for outdoor use only.
⚠
Be sure to always wear personal protective equipment when operating this equipment.
⚠
Improper assembly may be dangerous. Please follow the assembly instructions in this manual. Make sure all parts are
assembled and hardware is fully tightened before using. Make sure that there are no leaks in the liquid propane cylinder
connection or lines.
⚠
Do not operate the equipment if a gas leak is present. (check for leaks and connections with every use)
⚠
Do not attempt to disconnect the gas regulator from the tank or any gas fitting while the equipment is in use.
⚠
A dented or rusty liquid propane tank may be hazardous and should be checked by your liquid propane supplier. Do
not use a liquid propane tank with a damaged valve.
⚠
Ensure that your propane cylinder is within its expiry date for your local jurisdiction. If the tank has expired it must be
properly requalified to continue using.
⚠
Ensure that your propane cylinder is within its expiry date for your local jurisdiction. The manufacturing date is
stamped on the collar of the tank. If the tank has expired it must be properly requalified.
⚠
Do not store spare liquid propane cylinders within 10 feet (3m) of this equipment.
⚠
Do not store or use gasoline or other flammable liquids or vapors within 25 feet (8m) of this equipment.
⚠
Before servicing, make sure the unit is fully cooled and the liquid propane cylinder is disconnected.
⚠
Only genuine RynoWorx replacement parts should be used for any replacements or repairs. Do not attempt to modify
or alter this product in any way.
⚠
Do not attempt to make any repairs to gas carrying, gas burning, igniter components or structural components. Your
actions, if you fail to follow this warning, may cause a fire, an explosion, or structural failure resulting in serious personal
injury or death as well as damage to property.
⚠
This equipment should only be used with "Direct Fire" hot melt crack sealant.
⚠
Failure to follow these instructions could result in fire or explosion which could cause property damage, personal
injury or death.
