background image

www.planikafires.com   

 

   

 

 

 

i0776#01    

30.04.2014 

 1 

Configuration of the module with Wi-Fi and Smart Home System manual 

 

This manual allows to configure the module in order to control the bio fireplace by means of: 

1.

 

The device that has access to Wi-Fi (smartphone, tablet) – THE CONFIGURATION OF Wi-Fi 
and SMARTPHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    1 

2.

 

Smart Home System – SMART HOME SYSTEM CONNECTION . . . . . . . . . . . . . . . . . . . . 

 

1.

 

THE CONFIGURATION OF WiFi and SMARTPHONE 

The configured appliance will allow to: 

-

 

Turn on the product (if READY message on display) 

-

 

Turn off the product (for COOLING THE DEVICE or READY message on display) 

-

 

Make the flame size lower or higher while the bio fireplace is working 

-

 

Turn on/turn off ‘Lock the device’ function (Customer’s Menu, point 1) 

-

 

Choose the bio fireplace which is to be controlled. 

It will be also possible to check the serial number, program version, website version and total operating 

time. 

 

FLA 3 communicates with the exterior appliances by means of Wi-Fi. 

Make sure that Wi-Fi network you have is of 802.11 b/g/n standard and it operates the encryption of 
WPA/WPA2 PSK. 

If  your  Wi-Fi  network  does  not  fulfill  the  above  mentioned  requirements  it  has  to  be  adjusted. 
Otherwise, remote controlling of the bio fireplace via the appliance will not be possible. 

If Wi-Fi network is ready, prepare the formatted USB flash drive. 

Create a text file on USB flash drive with the name ‘wifi’ and ‘txt’ extension.   

Save the name of the network and password in the file in a given format, where: 

 

Instead of ‘Wi-Fi Network name’ – enter the name of the network, e.g. ‘home’ 

Wi-Fi Network Password – password to the network, e.g. ‘mynet’ 

Example: 

Summary of Contents for FKE-0683








Reviews: