RynoWorx RA-MLT-0005, Operator'S Manual, Page: 6 / 31


Introduction
Forward
Thank you very much for purchasing Ryno crack maintenance equipment. We pride ourselves in being different
from other equipment manufacturers with a relentless focus on innovation, simplicity, and quality.
RY Series Melter / Applicators are designed to effectively melt and apply direct-fire type crack sealant to joints
and cracks found in hard aggregate surfaces. This melter is powered by a liquid propane gas burner, which
effectively melts crack sealants within the kettle.
This melter was designed to be used with ‘Direct Fire’ crack sealants only. Please be sure to purchase the correct
material to ensure safe and effective operation.
Within this document are complete instructions for how to assemble, use and care for your equipment.
Please make sure you read and follow all instructions provided.
Within this document you will find the following resources:

Assembly Instructions
– These instructions will assist you in assembling and preparing your melter for
first time use.

Operation Guide
– This guide will explain the controls and functions of the melter and how to use them.

Maintenance Guide
–
This guide will provide you with suggested maintenance tips and techniques to
ensure proper function and optimal performance.

Troubleshooting Guide
–
This guide will provide you with the most commonly reported problems,
possible causes, and known solutions.