10. Control Arm Assembly
There are 2 types of control arm sets that could have been included with your machine. Please follow the
instructions for the type that was shipped with your machine.
Type 1 - with one threaded end, goes together as shown:
Each set of control arms is shipped as a pair of upper
and lower halves. Be careful not to switch the valve
and shoe lower half of the control arm.
If the lower halves of the control arms are mixed up,
the shorter of the two is for the shoe control arm.
Summary of Contents for RA-MLT-0005
