RynoWorx RA-MLT-0005, Operator'S Manual, Page: 18 / 31

Type 2:
Install the shoe control arm through the guide hole (handle end first)
Turn to Make Arm Longer
Turn to Make Arm Shorter
Adjust the length of the control arm by turning the
turnbuckle in the appropriate direction (shown above).
The final length of the arm should allow the drip guard
to fully cover the bottom of the transfer tube when the
shoe is in the raised position (shown to the right).
Once the final length is set, hold the turnbuckle in
position with an adjustable wrench and tighten both
nuts against the turnbuckle.