Rycom 8879 User Manual Download Page 10 | Manualshive

Page: 10 / 24

Rycom 8879 User Manual Download Page 10

SHIFT with the FREQUENCY

(ENGLISH/METRIC)

Press the SHIFT and the FREQUENCY buttons to toggle the units for display
of the device. When pressed it will toggle between English and Metric units.
When in Metric the display will show -

cm

- in the top of the display. When in

English, the display will show -

’ “

- in the top of the display.

LINE/SONDE

Press to toggle the depth mode from Line to Sonde modes. When in Line mode
the display will show LIN in the top of the display. When in Sonde mode the dis
play will show SON in the top display.

CURRENT

Press the CURRENT button to measure the amount of current that is flowing
while in the 815 Hz, 8 kHz or 82 kHz frequency modes.

Note: The CURRENT button will not work when in the 50/60 Hz frequency
modes.

MODE

Press the MODE button to toggle between PEAK, PINIPOINT PEAK and NULL
locating modes.

VOLUME

Press VOLUME button to toggle the volume of the device from High, Medium,
Low and Off. When this key combo is pressed, the volume level will be toggled
through the four volume levels in order.

BACKLIGHT

Hold the SHIFT Key and press the CURRENT key to toggle on and off the back
light.

8879 Receiver Controls and Indicators

Continued

9

8879 Head Phone Jack

The 8879 can be used with headphones. The jack is located on the back of the receiver head and is
labeled with earphone insignia.

«
...
8
9
10
11
12
...
»

Summary of Contents for 8879

























Reviews:

No comments