16
MOBILE AND WORKSHOP SERIES OPERATION MANUAL
October 2018 | Version: v1-0
CONTROL IDENTIFICATION
For Models:
RY20C
RY20CB
RY32C
RY32CB
1
Stop
Stops the motor and control unit.
2
Start
Starts the motor and control unit.
3
Semi-Automatic Control
4
Semi-Automatic Control Symbol
5
Manual Opening Button
The dies will open when this button is pressed. The dies open until
the button is released. When using this button manual mode must be
selected.
6
Manual Crimping Button
7
Foot Pedal Control Mode
When this is selected the control is via the foot pedal for both closing and
opening the dies.
8
Back Stop Control Mode
If the backstop is fitted the control is via the backstop and opening the
dies.
9
Mode Selection
Use this to select the different modes of operation and opening the dies.
10
Semi-Automatic Mode
Crimping starts when the control button is pressed. Once the crimp
diameter is reached the dies retract back to the set position irrespective
of whether. the button is pressed or not and opening the dies.
11
Manual Control Mode
Dies can be opened by pressing the button 5 and closed using button 18
and opening the dies.
12
Opening Data Adjustment Down
Adjust the opening of the dies once the crimp value has been
reached. Adjust so that the fitting can be easily inserted between the dies
but the extra movement is as short as possible.
13
Opening Symbol
Lights when die retraction in progress.
14
Opening Data Adjustment Up
Set as per 12 above.
15
Crimping Data Adjustment Display
16
Crimping Data Display
17
Crimping Data Adjustment Up
Use this button to increase the crimp value.
18
Crimping Data Adjustment Down
Use this button to decrease the crimp value.
19
Crimping Symbol
Digital Control Panel
OPERATION
1
2
3
4
5
6
7
16
15
14
13
12
19
17
18
9
11
10
8