15
should not be removed.
Spring Start-up
DO NOT turn HydroSalt
™
on, until the pool water chemistry has been balanced to proper
levels.
INSTALLATION
WARNING
:
Before Installation, consult your state & county codes. Installation must be
performed in accordance with local NEC codes.
Preparing Pool Water:
The pool’s chemistry must be balanced BEFORE activating the HydroSalt
™
. It is
recommended that you consult a pool professional for the initial balancing each season.
NOTE:
At the beginning of each season, add metal remover and polymer based (non
copper) algaecide to the pool, per manufacturer’s instructions. This ensures a quick,
trouble free transfer to the HydroSalt
™
system.
Mounting the HydroSalt
™
Control
The HydroSalt
™
is contained in a rain tight enclosure that is suitable for outdoor
mounting. The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance
from the pool/spa. The control is designed to mount vertically on a flat surface with the
knockouts facing downward. Because the enclosure also acts as a heat sink (disperses
heat from inside the box), it is important not to block the four sides of the control.
Do not mount the HydroSalt
™
in a panel or tightly enclosed space.
Summary of Contents for HydroSalt
Page 18: ...17...
