Russound DMS-3.1, Installation Manual

Page: 114 / 116

DMS-3.1 Test Procedure
64
of
64
Revision History
DMS-3.1 Procedure Revision History
Revision Date Revision Summary Initial
1.0 11/09/2010 Initial release John G
1.1 1/26/2011 First Revision John G
1.2 3/10/2011 Second Revision John G
1.3 7/12/2011 Third Revision John G
1.4 8/08/2011 Fourth Revision John G
Changes made from Rev 1.2 to Rev 1.3 on July 12, 2011
Sections 8. RVCLI App and 20. Airplay IC Status (U17) added to the Test Procedure
All other sections renumbered accordingly.
Both sections allow testing of U17 Apple Airplay IC.
Changes made from Rev 1.3 to Rev 1.4 on July 22, 2011
Review the complete document. Minor corrections are added in addition to
the Section 10,16 and 23 Steps below.
Section
10. Load Firmware Step 4 adds a line to ensure a jumper is
Installed on J34. This enables the Apple Airplay Processor.
Section 16. IP Address & MAC ID Step 1, 2, and 3 changed MAC ID to IP
Since we are reading the IP Address only.
Close the Putty window after MAC ID’s are recorded.
Section 23.
Aux USB (Russound Only) Allow Russound Personnel Only
to test the Aux USB Port. The CM can skip this section.