Russell Hobbs RHFP600, Instructions & Warranty

Page: 7 / 19

7
BEFORE FIRST USE
Important: Handle chopping blades and slice/shred disc carefully.
Remove all packaging material and any stickers from the product. Wash all removable
parts as instructed in “care and cleaning” section of this manual. Select a level, dry
countertop where the appliance is to be used, allowing air space on all sides to provide
proper ventilation for the motor (50mm gap min).
ASSEMBLING THE FOOD PROCESSOR / MINI CHOPPER
HOW TO INSERT AND REMOVE THE CENTRE POST
The centre post of the bowl is removable (3 Cup - Black, 10 Cup - White):
1. Turn the bowl upside down.
2. Grasp the outer tabs and turn the centre post clockwise until the
locking tabs are free. Lift the post out (A).
3. To return to its original position, place centre post into opening
in bottom of workbowl and turn counterclockwise until tabs snap
into place.
NOTE: The 10 cup bowl and 3 cup bowl centre posts are not
interchangeable.
HOW TO LOCK THE WORKBOWL IN POSITION:
1. Place the workbowl on the base with handle turned to the right
of the locking mechanism (B) over the unlock symbol .
2. Hold handle and rotate workbowl clockwise toward the lock
symbol
XQWLOLWFOLFNV¿UPO\LQWRSODFH&%HVXUHWRORFNWKH
workbowl in place before attaching the blades and cover.
HOW TO LOCK THE COVER
1. Place cover over workbowl with the small latch to the right of the
workbowl’s handle (D).
2. Hold feed chute of workbowl cover and rotate cover clockwise
until cover locks into place.
Important: For your protection this appliance has an interlock
system. The processor will not operate unless the workbowl, cover
and wide-mouth feed chute are properly locked in place.
3. Place the wide-mouth feed chute on top of the cover with the
small tab to the right of the workbowl’s handle. Turn clockwise
until it clicks into position in the handle.
4. Insert the food pusher into the central tube of the wide mouth
feed chute. Turn clockwise to lock in place. The pusher is used
to guide foods through the feed chute and can be removed when
adding liquid or additional foods while the processor is running.
To remove, turn counterclockwise.
A
B
C
D