AUTO-SHUT OFF FUNCTION
The iron features an extra safety feature which will shut down the iron automatically when
not in use for a long period. When the iron was not in use for longer than 5 minutes, the
steam level light will start flashing and the alarm will “beep” 3 times to shut off the iron. To
restart the iron, please press the steam setting button and the iron will restart.
AUTO-CONTINUOUS STEAM FUNCTION
In the case where you would like to iron with steam for a longer period to get out very
stubborn creases, you can press the steam trigger for 1 second, then the iron will
automatically and continuously steam for 1 minute. By pressing the steam trigger once
more will stop the continuous steam.
By pressing the steam trigger for more than 3 seconds will switch the steam burst to
manual mode and the iron will perform as per normal and not on the automatic continues
steam mode.
SELF-CLEANING
This function removes the scale and minerals built up in the Steam Chamber. The iron will
remain in the best condition if this function is performed once every two weeks. You may
choose to use the function more frequently depending on the hardness of the water used
or water available in your local area.
1. Make sure that the appliance is unplugged from the mains supply outlet.
2.
Fill the iron as described in “
How to Fill the Water Tank
” and fill the water tank with
100ml of water. Do not put vinegar or other descaling agents in the water tank.
3. Connect the iron with a suitable mains power supply outlet.
4. Hold the iron horizontally over a sink with water
5. By pressing the steam setting button for 3 seconds, the iron will be on stand-by
mode and the auto-pump will start to heat up the iron to start the cleaning process.
6. Steam and boiling hot water will emit from the holes on the soleplate which
contains impurities, scale, minerals and flakes (if any) that deposited in the Steam
Chamber from previous use.
