Russell Hobbs RHECOI, Warranty And Instruction

Page: 8 / 16

REA
D THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE
FOLLOWING:
Symbol Fabric Temp.
Variable
steam Steam
Burst Spraying
water
NOTE: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate fabrics.
HOW TO FILL THE WATER TANK
1. Disconnect the appliance from main power supply outlet.
2. Open the water inlet cover.
3. Place the iron in its horizontal position with the soleplate facing down.
4. Fill water through the water-filling inlet hole up to the MAX level mark indicated on
the side of the iron/ water tank. Never fill above this mark.
5. Close the water inlet cover and wipe off any spillages on Iron.
6. When the water level reaches a low level or is empty, the alarm will give out a
sound to indicate refilling is necessary. In this case, the user must stop using the
iron
and repeat steps 1 to 5 above in “
HOW TO FILL THE WATER TANK
” before
continuing to iron.
Note: For the best result, it is advisable to use de-mineralized water or distilled water. Do
not use chemically de-scaled water or any other liquids.
0
MAX
Synthetic
fibres/Silk
Wool
Cotton
Linen
Note: the symbol means:"This article cannot be ironed!”