3
Read the instructions and keep them safe. If you pass the kettle on, pass on the
instructions too. Remove all packaging, but keep it till you know the kettle works.
important safeguards
Follow basic safety precautions, including:
1 The kettle must only be used by or under the supervision of a responsible adult.
Use and store it out of reach of children.
2 Don’t put the kettle, stand, cable, or plug in liquid.
3 Don’t use the kettle in a bathroom, near water, or outdoors.
4 Don’t touch hot surfaces. Use the handle.
5 Don’t open the lid while the water is heating.
6 Take care when pouring – pour slowly, and don’t over-tilt the kettle.
7 The scald hazard lasts long after boiling. Keep the kettle, stand, and cable away from
the edges of worktops and out of reach of children.
8 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
9 Wind excess cable beneath the stand.
10 Unplug the stand when not in use, before moving and before cleaning. Let the
kettle cool down before cleaning and storing away.
11 Check the lid is fully closed before switching the kettle on, otherwise it may not
switch off.
12 Check the kettle is properly located on the stand before switching on.
13 Fill the kettle with at least 2 cups of water, but don’t fill past max, or it may spit
boiling water.
14 Remove the kettle from its stand before filling or pouring.
15 Keep the kettle, stand, cable, and plug away from sources of heat.
16 Don’t use the kettle for any purpose other than heating water.
17 Use the kettle only with the stand supplied (and vice versa).
18 This appliance must not be operated by an external timer or remote control system.
19 Don’t use the kettle if it’s damaged or malfunctions.
20 If the cable is damaged, return the kettle, to avoid hazard.
household use only
before using for the first time
Fill to max, boil, discard the water, then rinse. Do this three times, to remove
manufacturing dust, etc.
dual elements
This kettle has a high power element for boiling, and a low power element for keeping
warm.
positioning
1 Put the stand on a stable, level surface.
2 Route the cable so it doesn’t overhang, and can’t be caught or tripped over.
3 Wind excess cable beneath the stand
