The control panel
switches the slow cooker between standby and active.
Mode switches between Low for long slow cooking, and High for “fast” slow
cooking (4 hours or less). The Low and High lights show the mode.
increases the time shown on the display by 1 hour.
decreases the time shown on the display by 1 hour.
Start starts the slow cooker, once everything’s set.
Warm when cooking is over, the slow cooker changes to Warm mode, and the
Warm light comes on. Warm mode is not available as a choice.
Here’s how
1.Decide when you want to eat and when you want to start cooking.
2.Find a recipe that suits your timing. If you want to eat at 6 p.m., and you
need to start cooking at 8 a.m., find a recipe that takes about 10 hours.
4.Sit the slow cooker on a stable, level, heat-resistant surface, close to a
power socket and out of reach of children.
5.Plug the slow cooker into the power socket. If necessary, switch the socket
on. The display will show 12:00 — ignore it.
9.Press to change from standby to active. The display will change to 4:00.
10.Press the Mode button to turn the Low light off and the High light on.
11.Leave the slow cooker to heat up for 20 minutes.
4
10951 RHTwo-pot Slow Cooker.qxd 6/27/03 11:04 AM Page 4