20
RUSH MH 4 Beam User Manual
To adjust the low power setting:
1. Select LAMP SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select LOW POWER DELAY and press
ENTER to confirm.
3. Use the DOWN and UP buttons to specify a duration.
4. Press ENTER to confirm (or to return to the previous menu level without
making a change, press MENU).
Display settings
Invert display
Inverting the display is useful if the fixture is hung from a truss or from
elevation. To invert the display:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select DISPLAY INVERSE and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select the YES (invert).
4. Press ENTER to confirm (or to return to the previous menu level without
making a change, press MENU).
Automatically turn off display backlight
The display backlighting remains on permanently by default when power is
applied to the fixture. If you prefer, you can enable Sleep mode, where the
backlighting goes off automatically when the buttons and menus have not
been used for a short period:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT AUTO OFF and
press ENTER to confirm.
3. Use the DOWN and UP buttons to select YES to enable automatic
dimming.
4. Press ENTER to confirm (or to return to the previous menu level without
making a change, press MENU).
Adjust backlight intensity
The brightness of the control panel display can be adjusted:
1. Select DISPLAY SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select BACKLIGHT INTENSITY and
press ENTER to confirm.