28 Status
messages
Status messages
message reason
The heaters are Off, the unit is shut down.
The unit is heating up to operating temperature.
The heater is at operating temperature, but Fog is not turned
on (RUN set to STBY or FOG set to 0%).
The heater is at operating temperature and the unit is under
DMX control.
The system is in Timer mode and is in a RUN period (the
number counts down to show the run time)
The system is in Timer mode and is in an OFF period (the
number counts down to show the off time)
Run out of fluid. Refill the fluid tank and operate the base
prime function (bottom right hand button on control display)
The system has detected an error with its calibration settings
and will not operate. Call Martin Service.
The system has detected an error in the temperature sensor
and will not operate. Call Martin Service.
Res etti ng th e sy stem after f luid out
If the system runs out of fluid simply refill the fluid container and follow the
priming instructions on page 18.
