EN
13
After replacing the blade or after about 15 hours of work it is necessary to adjust the blade
pushers.
Clean the water jet bar and then overlay the teeth of the2 blades.
With screws and nuts remove excess space between the teeth, caused by fig wear. D6.
Make sure the movement of the bar is free, protecting your hands with gloves.
WARNING! To correct the adjustment of the blade, it is recommended that you contact
an authorized assistance centre. If the mowing bar is not adjusted correctly, the grass will
not be cut evenly over the entire surface.
TRANSMISE REDUCTOR
Control the transmission oil level every 25 hours of work. Remove the wheel from the
right side and, with the machine in a horizontal position, remove the cover on the side.
Check that the oil level reaches the lower board of the filling mouth. If missing, add the
appropriate oil.
Important!
In order not to pollute the groundwater, the spent oil should not be disposed
of in the environment or in the drains or in the water channels. Waste oil may be taken
to petrol or authorized warehouses according to the rules in force of the place of
residence.
COSIRE BAR TRANSMISE
It is represented by the two lubrication points (1 and2). That's important! After each use
of the mower you must clean and lubricate the mower and all parts in motion with
Vaseline.
BETWEENTHEMOTORING INERE
The mower is supplied with a four-stroke engine without oil. Fill the oil tank up to the
indicated level (capacity about 0.55L). Regarding the type of oil and viscosity level, follow
the engine manufacturer's instructions.
9. MAINTENANCE AND STORAGE
It is recommended to carefully clean the machines after each grinding session. Check
that the screws and nuts are tight to ensure that the machine is safe to function properly.
When the machine is not in use for long periods of time, it is mandatory to protect the
bar and blade with anticorrosive and antioxidant substances. Let the mower cool well
before storing it, do not store it inside abuilding if there is gasoline in the tank, as
Summary of Contents for Scythe DAC 777K
Page 1: ...RO MOTOCOSITOARE CU MASĂ DAC 777K ...
Page 25: ...EN SCYTHE MOWER DAC 777K ...
