EN
7
5. MOUNTING
The mower is delivered disassembled and placed in appropriate packaging. To complet
ethe fitting follow the procedure below:
1.
Assemble mowing bar
In Figure C1, the installation and adjustment of the limiting skates is detailed.
Used to adjust the working height. Patina 1 is fixed to the mower bar 2 with the
help of two screws and nut. Before starting the two left-right skates, they must
be adjusted correctly to the same working height. The adjustment of the
working height is carried out from the back of the skate.
2.
Mounting the mowing bar on the mower chassis see fig. D5, D6
Figure C2 and C4 shows the chassis of the mower on which the mower bar
must be mounted. To mount the mower bar on the chassis of the machine, the
drive rod 3 must be positioned in the middle of the chassis.
On the head of the drive rod 3 insert the piece 1. At this point, mount the
mowing bar 2 in the 3 movable rod bolt and fasten the movable mowing bar
into the 4 screws using the tightening nut.
Summary of Contents for Scythe DAC 777K
Page 1: ...RO MOTOCOSITOARE CU MASĂ DAC 777K ...
Page 25: ...EN SCYTHE MOWER DAC 777K ...
