Ruris Clean PowerJet 1100, Manual

Page: 79 / 132

EN
15
High pressure jets can be dangerous if used abusively. The jet must not be aimed at
persons, active electrical equipment or the appliance itself. ! Do not point the jet against
you. or other persons.
7. Cleaning rod instructions
Using the included nozzle cleaning tool, insert the wire into the nozzle hole and
move it back and forth until the debris is removed. (Fig.7)
Fig.7
7. MAINTENANCE AND STORAGE
•
Rotate the pressure vacuum cleaner to the OFF position, disconnect the power
cord from the wall outlet.
•
Turn off the water supply.
•
Before disconnecting the high pressure hose, point the gun in a safe direction
and discharge the water from the high pressure hose.
•
Disconnect the high pressure hose from the device and gun.
•
Disconnect the hose from the pressure gauge.
•
Remove excess water from the pump by tilting the unit on both sides to drain
the remaining water from the intake and discharge accessories.
•
Remove the water intake filter and wash with water to remove dirt or debris.
•
Drain the remaining detergent into the dedicated tank and wash it with clean
water.
•
Wipe the remaining water from all parts and accessories.
•
Lock the gun safely.
•
Store the pressure gauge, parts and accessories in an area with a temperature
above 0 ° C (32 ° F).
Do not dispose of electrical, industrial electronic equipment and parts
of household waste! WEEE information. Considering the provisions of
GEO 195/2005 - regarding environmental protection and O.U.G. 5/2015.