3 - 19
3
DESCRIPTION OF TRACTOR CONTROlS
IMPORTANT
Always use the clutch when
engaging or disengaging the
PTO or changing PTO speed.
Let the PTO driven implement
come to a complete stop be-
fore changing.
Check whether the seat properly
locked in its position before driv-
ing the tractor.
•
CAUTION
OPERATING THE HyDRAUlICS
The hydraulics are powered with an
engine driven hydraulic pump and
controlled with a position control le-
ver mounted beside the driver.
►
T74O34A
Position Control Lever
When working with the 3-point
linkage, keep well clear of the op-
erating radius of the lift arms and
any attached implement. This is
to avoid the risk of injury in the
case of incorrect manoeuvres.
•
CAUTION
POSITION CONTROl
implements can be raised and low-
ered with the hydraulic position con-
trol lever and can be stopped at any
position by stopping the lever.
To ensure a consistent working
depth the adjustable stop can be set
to ensure that the implement returns
to the same depth every time.
To raise the implement: Pull the
lever back.
To lower the implement: Push the
lever forward.
WARNING
After finishing the work, always
lower the implement to the
ground and switch off the en-
gine, Set the parking brake to
avoid injuries and accidents.
Summary of Contents for RK74 Power Shuttle
