Rupes SR100AEN, Operating And Maintenance Instructions Manual

Page: 8 / 34

8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of the-
se documents; the operating instructions indicate the additional infor-
mation required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
Wear clothing suited to the work you are about to perform.
Always work with the protective suction hood assembled.
Make sure that the abrasive rollers have been assembled and
tightened properly.
Make sure that the sparks caused during work do not create danger
by hitting people or inflammable substances.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the processed
work material.
Remember to always use all personal protection devices (such as
gloves, headphones, goggles, etc.) according to laws in force to
prevent or reduce accident probability.
Warning! the appliance continues to work for a few seconds after it
has been switched off!
SPECIFIC USE
Before use make sure that the abrasive rollers operating characteri-
stics are compatible with those of the machine and that they are not
broken or worn.
Make sure that the abrasive rollers are assembled, handled and sto-
red with care according to the manufacturer's indications.
Do not use and adapter system for abrasive rollers other than those
specified.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.
TYPE SR100AEN SR200AE
PROTECTION CLASS II II
OPERATING VOLTAGE 230 V – 50 HZ 230 V – 50 HZ
ABSORBED CURRENT 4,3 A 5,3 A
ABSORBED POWER 900 W 1.100 W
OVERLOAD PROTECTION YES YES
ELECTRONIC SPEED CONTROL YES YES
RPM 1500÷4000 1500÷4000
ROLLER DIAMETER mm 100 100
THREAD OF ROLLER BEARING SHAFT M 14 M 14
RETAINER OF ROLLER BEARING SHAFT M8 SCREW M8 SCREW
WEIGHT Kg 2,6 2,8
TECHNICAL DATA ENGLISH
8
GENERAL WARNINGS
The tool must be connected to a suitable dust extraction system (not supplied).