Installation
Runco LS-3/LS-5 Installation/Operation Manual
33
PRE
L
IMINAR
Y
3.9
Changing the OSD
Language
When you turn on the LS-3/LS-5 for the first time, the OSD Language Menu appears.
The LS-3/LS-5 can display the menus in English, French, German, Italian, Spanish,
Swedish, Traditional Chinese, Simplified Chinese, Japanese, Korean, Portuguese or
Russian.
Press
or
to select a language. Then, press
ENTER
to confirm your selection.
3.10
Adjusting the Picture
Orientation
If the LS-3/LS-5 is installed behind the screen, you must change the picture orientation to
match the installation method. To do this, press
MENU
on the remote control. Then,
select System from the Main Menu.
Rear Projection
If the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly
to select Rear Projection from the System Menu. Press
or
to set it to
On
.
Ceiling Mode
If the projector is ceiling-mounted, the LS-3/LS-5 automatically inverts the image. If this
automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to
Off
.
Summary of Contents for LightStyle LS-3
