Runco LightStyle LS-3 Installation & Operation Manual Download

Page: 20 / 106

Introduction

Runco LS-3/LS-5 Installation/Operation Manual

PRE

IMINAR

Key Features and Benefits

The LS-3/LS-5 offers these key features and benefits:

• Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio)

• DLP system using high-performance Digital Micromirror Device (DMD)

• Customized color wheel produces wide dynamic range and rich grayscale

• ConstantContrast™ provides for infinitely variable adjustment of the light path through

the optics, enabling the perfect balance of black and white levels for any type of video
source material

• Picture in Picture function allows you to display two inputs on the screen at the same

time

• Two (2), HDMI 1.3 Inputs with High-bandwidth Digital Content Protection (HDCP)

• HDTV Compatible

Additional Features of the LS-5:

• Greater optical contrast (up to 15,000:1 with ConstantContrast enabled)

• Horizontal (as well as vertical) lens shift

• Expanded connectivity (additional component video input and 12-volt trigger output)

Parts List

Your LS-3/LS-5 is shipped with the following items. If any items are missing or damaged,
please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO.

• LS-3/LS-5 DLP Projector

• Remote Control Unit and two (2), AA-size batteries

• AC Power Cords (North America, Europe, United Kingdom)

• Source Connection Cables:

• Component Video

• HDMI to HDMI

• Warranty information and registration card

• Cleaning Cloth

• 5.0-mm Hex wrench (for lens shift adjustment)

• Runco LS-3/LS-5 Installation/Operation Manual (this document)

• Runco LS-3/LS-5 Quick Setup Guide

Optional Accessories:

• CineWide™ technology (fixed, secondary anamorphic lens)

• Ceiling mount kit (part number 997-4214-00)

• Short-throw lens, 1.56:1-1.86:1

• Replacement Lamp (part number 997-5268-00)

➤

Summary of Contents for LightStyle LS-3











































































































Search results

Summary of Contents for LightStyle LS-3

Reviews:

Related manuals for LightStyle LS-3

Brands by name

Popular brands

Runco LightStyle LS-3, Installation & Operation Manual

Search results

Summary of Contents for LightStyle LS-3

Reviews:

Related manuals for LightStyle LS-3

Brands by name

Popular brands