Ruijie RSR10 Series, Hardware Installation Manual

Page: 14 / 104

Chapter 1 Product Overview Installation Manual
1-4
Figure 1-2 Back panel of Ruijie RSR10-02 router
○
1 SIC card slot1;
○
2 SIC card slot2;
○ 3 Power switch;
○ 4 Input power interface;
○
5 Enclosure ground interface;
Note
If you cannot determine the number of the slot where the current module
resides, you can execute the
show slots command in the privileged EXE
mode. The router version information includes the slot number of each
module.
1.1.1.4
Parameters
The following table lists the parameters of RSR10-02:
Item
RSR10-02
Default Configuration One Console port, two 10/100M Ethernet ports
SIC card slot
2 (User can configure up to two SIC cards in
according to requirement.)
Processor RISC high performance processor
SDRAM 64MB
Boot Rom
2MB
Data
NAND FLASH
32MB
Dimensions (W×H×D) 268mm×44mm×185mm (1U)
Input voltage AC100~240V 50~60Hz
Whole-system power consumption < 20W
Operating ambient temperature
0~45°C