Ruijie RSR10 Series, Hardware Installation Manual

Page: 102 / 104

Chapter 6 Cable Connection Installation Manual
6-4
 In the laboratory, there is another special application that implements the back-to-back
connection between our company’s syn cards through the V.35 DTE-V.35 DCE cables
Table 6-6 Connect the syn interface of the router working under the V.35 mode.
Equipment Mode Cable 1 Peer
V.35 DTE mode V.35 DTE
GV converter, V.35
Modem
V.35 DCE mode V.35 DCE cables
Equipments working
under V.35 DTE mode
SIC-1HS, and
NMX-4HSH
Back-to-Back
mode V.35 DTE-V.35 DCE
cables
Our company’s
SIC-1HS and
NMX-4HSH
6.1.3 Connecting An E1 Interface
6.1.3.1
Connecting E1/CE1 of DB9F interface to
Base Band Modem
Through non-balanced cable
Through balanced cable (with crystal connector)
Through balanced cable(with crystal jack)
Table 6-9 Connect E1/CE1 interface to base band modem
Equipment Cable 1 Cable 2 Peer
non-balanced
cable
/
BNC
interface
balanced cable
(with crystal
connector)
/
SIC-1E1-F
SIC-1CE1
balanced cable
(with crystal
jack)
Straight through
cable
RJ45
interface
Base band
Modem
6.1.3.2
Connecting E1/CE1 of DB25M interface to
Base Band Modem
Through 4E1 non-balanced cable