Ruijie RSR10 Series, Hardware Installation Manual

Page: 101 / 104

Installation Manual Chapter 6 Cable Connection
6-3
6.1.1.3 Connecting the RCMS Asyn Interface to
the CONSOLE Interface
The RCMS converter cable converts the 68-pin RCMS asyn interface into eight RJ45
connectors, and then connects to the RJ45 connector of the console port of switch/router.
This mode applies to such modules as RCMS-16 and RCMS-8.
Table 6-4 Connect the RCMS asyn interface to the CONSOLE interface
Equipment Cable 1 Peer
RCMS-16
RCMS-8
RCMS converter cable CONSOLE interface
6.1.2 Connecting A Synchronous Interface
6.1.2.1 V.24 mode
The syn interface of the router line card working under V.24 DTE mode is connected to the
peer working under the V.24 DCE mode through V.24 DTE cables. While the syn interface
working under V.24 DCE mode is connected to the peer working under the V.24 DTE mode
through V.24 DCE cables.
This applies to the V.24 DTE/ V.24 DCE mode of such line cards as SIC-1HS and
NMX-4HSH.
Table 6-5 Connect the syn interface of the router working under the V.24 mode.
Equipment Mode Cable 1 Peer
V.24 DTE mode V.24 DTE cables V.24 Modem The syn
interface line
card with
DB26 interface
such as
SIC-1HS,
NMX-4HSH
V.24 DCE mode V.24 DCE cables
Equipments working
under V.24 DTE mode
6.1.2.2 V.35 mode
 The syn interface of the router line card working under V.35DTE mode is connected to
the peer as GV converter and V.35 Modem through V.35 DTE cables. While the syn
interface working under V.35 DCE mode is connected to the peer working under the
V.35 DTE mode through V.35DCE cables.
This applies to the V.35 DTE/V.35 DCE mode of such line cards as SIC-1HS, and
NMX-4HSH.