background image

Indicator 

Panel Identification 

Status 

Meaning 

port indicator 

For the 
M3000E-02SFP/GT 

Solid green 

The 1000 M link that the port connects to is Up. 

Blinking green 

Data at a rate of 1000 M are being transceived at 
the port. 

Solid yellow 

The 100 or 10 M link that the port connects to is 
Up. 

Blinking yellow 

Data at a rate of 100 or 10 M are being 
transceived at the port. 

Extension  module 
port indicator 

For 

the 

M3000E-STACK 

Off 

The stack port is not connected to a link. 

Solid green 

The stack port links up.   

Blinking green 

Data are being transceived at the stack port. 

RPS link indicator 

 

RPS 

Off 

The redundant power supply module is not 
connected or is not powered on. 

Solid green 

The redundant power supply module is 
connected and can supply power. 

Solid yellow 

The redundant power supply module is 
supplying power. 

Solid red 

The redundant power supply module is 
connected but does not supply power. 

10/100Mbps RJ-45 
port indicator 

1~24 

Off 

The port is not connected to a link. 

Solid green 

The 100 M link that the port connects to is Up. 

Blinking green 

Data at a rate of 100 M are being transceived at 
the port. 

Solid yellow 

The 10 M link that the port connects to is Up. 

Blinking yellow 

Data at a rate of 10 M are being transceived at 
the port. 

POE state  indicator 

(only 

for 

S3760E-24P 

and 

the POE indicator is 
solid yellow)

 

1~24 

Off 

The POE is not powered on. 

Solid green 

The POE has been powered on. 

Solid yellow 

The POE is overloaded, and is not powered on. 

Solid red 

The port POE does not supply power.

 

1000Mbps SFP 
port indicator 

25F, 26F 

Off 

The port is not connected to a link. 

Solid green 

The 1000 M link that the port connects to is Up. 

Blinking green 

Data at a rate of 1000 M are being transceived at 
the port. 

Solid yellow 

The 100 M link that the port connects to is Up. 

Blinking yellow 

Data at a rate of 100 M are being transceived at 
the port. 

1000Mbps RJ-45 
port indicator 

25, 26 

Off 

The port is not connected to a link. 

Solid green 

The 1000 M link that the port connects to is Up. 

Blinking green 

Data at a rate of 1000 M are being transceived at 
the port. 

Summary of Contents for RG-S3760E Series









































Reviews: