Ruijie RG-RSR10-02E Series Hardware Installation And Reference Manual Download Page 54

Page: 54 / 56

Device

Peer

AUX port

Rollover cable

RJ-45(crystal jack)-DB25

male converter

DB25F interface of the Modem

Connecting an Asynchronous Interface Module to a Terminal

The asynchronous cable with 1-to-8 crystal connectors converts the 68-pin connector of the asynchronous interface into

eight RJ-45 connectors, and connects to the DB9M interface of a terminal (for instance, dumb terminal) through the RJ-45

(crystal jack)-DB9 female converter.

If you use the asynchronous cable with 1-to-8 crystal jacks, you need to use a straight network cable to connect the

converter cable of the asynchronous interface module to the converter.

This mode applies to modules SIC-8A.

Table: Connecting the asynchronous interface module to a terminal.

Device

Cable 1

Cable 2

Cable 3

Peer

SIC-8A

Asynchronous

cable with 1-to-8

crystal connectors

Straight-through

cable

RJ-45(crystal

jack)-DB9

female

converter

DB9M

interface

Terminal

(like a dumb

terminal)

RJ-45(crystal

jack)-DB9 female

converter

N/A

DB9M

interface

Connecting a Synchronous Interface

V.24 Mode

The synchronous interface of the router line card working in V.24 DTE mode is connected to the peer working in V.24

DCE mode through V.24 DTE cables. While the synchronous interface working in V.24 DCE mode is connected to the

peer working in V.24 DTE mode through V.24 DCE cables.

This applies to the V.24 DTE/ V.24 DCE mode of line cards SIC-1HS.

Table : Connecting the synchronous interface of the router working in V.24 mode.

Device

Mode

Cable 1

Peer

The SIC-1HS and

synchronous interface line

cards with DB26 interface

V.24 DTE mode

V.24 DTE cables

V.24 Modem

V.24 DCE mode

V.24 DCE cables

Device working in V.24 DTE

mode

V.35 Mode

The synchronous interface of the router line card working in V.35DTE mode is connected to the peer as GV converter and

V.35 Modem through V.35 DTE cables. While the synchronous interface working in V.35 DCE mode is connected to the

peer working in V.35 DTE mode through V.35DCE cables..

This applies to the V.35 DTE/V.35 DCE mode of such line cards SIC-1HS.

Summary of Contents for RG-RSR10-02E Series

























































Search results

Summary of Contents for RG-RSR10-02E Series

Reviews:

Related manuals for RG-RSR10-02E Series

Brands by name

Popular brands

Ruijie RG-RSR10-02E Series, Hardware Installation And Reference Manual

Search results

Summary of Contents for RG-RSR10-02E Series

Reviews:

Related manuals for RG-RSR10-02E Series

Brands by name

Popular brands