and 115200 bps. The default is 9600 bps.
Table 1-6 Specifications of the AUX port
Index
Parameter
Interface Standard
EIA/TIA-RS232
Connector
RJ-45
Rate
Supports 9600 to 115200 bps baud rates. The configurable frequency points are 9600,
19200, 38400, 57600 and 115200 bps. The default is 9600 bps.
Cables
Serial cables are supplied with the RSR10-02E router.
FE Ports
Port Image and LED Indicators
The following figure shows the fixed FE ports and its corresponding Link/ACT LED indicators.
Figure 1-5 FE Ports and Corresponding LED Indicators
For descriptions of FE port Link/ACT LED indicators, see the “LED Indicators” section in Chapter 1.
An RSR10-02E series router provides eight fixed 10/100 Mbps Ethernet ports.
The following table describes the basic features of the Ethernet ports.
Table 1-7 Specifications of the FE ports
Protocol
IEEE Std 802.3-2008
Quantity
8
Interface Type
10Base-T/100Base-TX interface
Cables
All FE ports use Category 5 unshielded twisted pair (UTP) RJ-45 cables.
Straight-through cable
: All wire pairs are in the same order on each end of the RJ-45 cable. The straight-through cable
is used to connect a terminal device such as a PC or router to a hub or LAN switch.
