Table 1-8 Crossover Cable Pinouts
RJ45 Pin #
End 1
Signal
Color
RJ45 Pin #
End 2
Signal
Color
1
TX+
White-green
1
TX+
White-orange
2
TX-
Green
2
TX-
Orange
3
RX+
White-orange
3
RX+
White-green
6
RX-
Orange
6
RX-
Green
GE Ports
Port Image and LED Indicators
The following figure shows the fixed GE ports and its corresponding Link/ACT LED indicators.
Figure 1-9 GE Ports and Corresponding LED Indicators
For descriptions of GE port Link/ACT LED indicators, see the “LED Indicators” section.
An RSR10-02E series router provides two fixed 10/100/1000 Mbps Ethernet ports. The copper port uses an RJ-45
connector.
Features
The following table describes the basic features of the GE ports.
Table 1-9 Specifications of the GE ports
Parameter
Description
Interface
Two 10/100/1000Base-T/1000Base-TX interfaces
Interface
standard
IEEE Std 802.3-2008
Cables
10/100/1000Base-T uses the Category 5e UTP or STP with the maximum transmission distance of 100 meters.
Straight-through cable
: All wire pairs are in the same order on each end of the RJ45 cable. The straight-through cable is
used to connect a terminal device such as a PC or router to a hub or LAN switch.
