1-41
Configuration Guide
eWeb Configuration (Standalone Mode)
Figure 3-6-2 Storm Control
Batch adding ports/Adding a single port for storm control
1.
Click
Batch Edit
. In the displayed dialog box, select ports, enter the broadcast, unknown unicast, and unknown multicast
rate limits, and click
OK
. A message "Operation succeeded." is displayed, and the port list is updated.
2.
Click
Edit
in the
Action
column of
Port List
. In the displayed dialog box, enter the broadcast, unknown unicast, and
unknown multicast rate limits, and click
OK
. A message "Operation succeeded." is displayed, and the port list is updated.
Batch deleting ports/Deleting a single port for storm control
1.
Select multiple entries in
Port List
and click
Delete Selected
. In the displayed confirmation box, click
OK
.
2.
Click
Delete
in the
Action
column. In the displayed confirmation box, click
OK
.
Tips:
1.
You must set the Rx speed or the Tx speed.
2.
When the broadcast, unknown unicast, and unknown multicast rate limits are empty, the port rate is not limited.
3.6.3 ACL
An access control list (ACL) is also referred to as firewall or packet filter in some documents. The ACL controls (permits or
discards) data packets on a network device interface by defining ACEs.
The
ACL
module includes
ACL List
(two types:
Based on MAC
and
Based on IP
) and
ACL Binding
.
Summary of Contents for RG-NBS Series
Page 1: ...Ruijie RG NBS Series Switches Web Based Configuration Guide...
Page 14: ...1 10 Configuration Guide Configuration Guide Figure 2 4 3 Standalone Mode...
Page 27: ...1 23 Configuration Guide eWeb Configuration Standalone Mode Figure 3 3 7 ARP List...
Page 61: ...1 57 Configuration Guide eWeb Configuration Standalone Mode Figure 3 9 4 Backup Import...
