1-36
Configuration Guide
eWeb Configuration (Standalone Mode)
3.5.4 Rate Limiting
The
Rate Limiting
module allows you to configure a port rate limit.
Figure 3-5-5 Rate Limiting
Batch editing the rate limit of ports/Editing the rate limit of a single port
1.
Click
Batch Edit
. In the displayed dialog box, select ports, set the Rx speed or the Tx speed, and click
OK
. The message
"Edit operation succeeded." is displayed, and the port list is updated.
2.
Click
Edit
in the
Action
column. In the displayed dialog box, set the Rx speed or the Tx speed, and click
OK
. The
message
"Operation succeeded." is displayed, and the port list is updated.
Batch deleting the rate limit of ports/Deleting the rate limit of a single port
1.
Select multiple entries in
Port List
and click
Delete Selected
. In the displayed confirmation box, click
OK
.
2.
Click
Delete
in the
Action
column. In the displayed confirmation box, click
OK
.
Tips:
1.
You must set the Rx speed or the Tx speed.
2.
When the Rx speed and the Tx speed are not set, the port rate is not limited.
Summary of Contents for RG-NBS Series
Page 1: ...Ruijie RG NBS Series Switches Web Based Configuration Guide...
Page 14: ...1 10 Configuration Guide Configuration Guide Figure 2 4 3 Standalone Mode...
Page 27: ...1 23 Configuration Guide eWeb Configuration Standalone Mode Figure 3 3 7 ARP List...
Page 61: ...1 57 Configuration Guide eWeb Configuration Standalone Mode Figure 3 9 4 Backup Import...
