1-34
Configuration Guide
eWeb Configuration (Standalone Mode)
Figure 3-5-3 Aggregate Ports
Global Settings
Select a value from the
Load Balance Algorithm
drop-down list box, and click
Save
.
Adding an aggregate port
Enter an aggregate port ID, select member ports (ports that have been added to another aggregate port cannot be selected),
and click
Save
. The message "Operation succeeded." is displayed. The port panel displays the added aggregate port.
Batch deleting aggregate ports/Deleting a single aggregate port
In the aggregate port list, click to select aggregate ports, and click
Delete Selected
. In the displayed confirmation box, click
OK
. A deleted aggregate port becomes available on the port panel.
Tips:
1.
A port that has been added to an aggregate port cannot be selected and added to another one.
2.
After an aggregate port is deleted, its member ports are restored to the default settings and are disabled.
3.
An aggregate port contains a maximum of eight member ports.
Summary of Contents for RG-NBS Series
Page 1: ...Ruijie RG NBS Series Switches Web Based Configuration Guide...
Page 14: ...1 10 Configuration Guide Configuration Guide Figure 2 4 3 Standalone Mode...
Page 27: ...1 23 Configuration Guide eWeb Configuration Standalone Mode Figure 3 3 7 ARP List...
Page 61: ...1 57 Configuration Guide eWeb Configuration Standalone Mode Figure 3 9 4 Backup Import...
