1-19
Configuration Guide
eWeb Configuration (Standalone Mode)
Figure 3-3-3 Static MAC
Adding a static address
Click
Add
. In the displayed dialog box, enter the MAC address and VLAN, select a port, and click
OK
. The message "Add
operation succeeded." is displayed, and the MAC list is updated.
Batch deleting static MAC addresses/Deleting a single static MAC address
1.
Select the target MAC address in
MAC List
, and click
Delete Selected
. In the displayed confirmation box, click
OK
. A
message indicating successful deletion is displayed, and the MAC list is updated.
2.
Click
Delete
in the
Action
column. The message "Are you sure you want to delete the entry?” is displayed. In the
displayed confirmation box, click
OK
in the displayed dialog box. The message "Delete operation succeeded." is displayed.
Tips:
The switch forwards packets based on the MAC address table. Bind a static MAC address with a port, and the packet destined
for this address will be forwarded to the port. You can configure MAC address binding for a port enabled with 802.1x
authentication.
3.3.2.3 Dynamic MAC
The
Dynamic MAC
page displays dynamic MAC addresses learned by the device.
Summary of Contents for RG-NBS Series
Page 1: ...Ruijie RG NBS Series Switches Web Based Configuration Guide...
Page 14: ...1 10 Configuration Guide Configuration Guide Figure 2 4 3 Standalone Mode...
Page 27: ...1 23 Configuration Guide eWeb Configuration Standalone Mode Figure 3 3 7 ARP List...
Page 61: ...1 57 Configuration Guide eWeb Configuration Standalone Mode Figure 3 9 4 Backup Import...
