RG-SS6510
-
4C Series Switch Hardware Installation and Reference Guide
System Debugging
- 33 -
Figure 4-2
Enter the name of the new connection and click
OK
. A window appears as shown in Figure 4-3. In the column of
Connect Using field, select the serial port you want to use.
Figure 4-3
After the serial port is selected, please click
OK
. The Serial Port Parameter Setting window is displayed, as shown in
Figure 4-4. Set the baud rate as 9600, data bit as 8, parity check as none, stop bit as 1, and flow control as none.
Figure 4-4
