RG-SS6510
-
4C Series Switch Hardware Installation and Reference Guide
Product Installation
- 28 -
Insert the power module smoothly. Please pay attention to the direction of the power panel to avoid wrong
insertion.
If it is difficult or even impossible to insert the module, pull out the module, make sure the extension module and
guide rail are well aligned, and then insert the module again.
Removing a Power Module
1)
Press the plug of the power module, Hold on to the module handle with one hand to pull out part of the module,
hold the bottom of it with the other hand, and pull out the power module uprightly and slowly.
2)
Install a blank panel in the power module slot and put the removed power module into its package.
Figure 3-5 Removing a power module
Remove the power module uprightly and slowly.
Install a blank panel to the empty slot to prevent dust from entering the switch.
