RG-SS6510
-
4C Series Switch Hardware Installation and Reference Guide
Product Installation
- 23 -
you should reserve space of at least 10mm between the front panel of the equipment and that of the cabinet after
installation. Before mounting into a cabinet, you need to make sure the following conditions are met:
Fasten the cabinet.
Insert various modules in the frame properly.
Remove any obstacle in the frame and the surrounding environment.
Prepare the equipment to be installed and move it to the place near the cabinet where you can handle it easily.
Installing Mounting Brackets
1)
Take out the two L-shape brackets and eight M4*8FMO countersink screws from the plastic package.
2)
Install the brackets at the side panels of the switch, and fix the brackets with four M4*FMO countersink screws at
each side.
Figure 3-1 Installing Mounting Brackets
Mounting the Switch to a Rack
The RG-S6510-4C series switch is qualified for EIA standard and can be installed in 19-inch wiring cabinet. During the
process of installation, keep the front panel of the switch forward. It is recommended use tray to install the
RG-S6510-4C series switch and fix the tray on the bracket, or use the rear bracket provided with the switch.
Attach a rack-mount bracket and an inner rail to each side of the chassis.
