Direct or indirect touch through a wet object on high-voltage and mains supply may bring a fatal danger.
Static Discharge Damage Prevention
To prevent damage from static electricity, pay attention to the following:
Proper grounding of the equipment and floor
Indoor dust prevention
Proper humidity conditions
Laser Safety
Among the modules supported by the RG-S2600E series, a great number of optical modules are Class I laser products.
Therefore, pay attention to the following when you use them:
When a fiber transceiver works, ensure that the port has been connected with an optical fiber or is covered with a
dust cap, to keep out dust and avoid burning your eyes.
Do not stare into any optical port.
Do not stare into any optical port under any circumstances, as this may cause permanent damage to your
eyes.
Installation Site Requirements
The RG-S2600E series must be used indoors. To ensure the normal working and a prolonged durable life of the
equipment, the installation site must meet the following requirements.
Ventilation Requirements
For the RG-S2600E series, you must ensure that sufficient space (at least 10 cm distance from both sides and the back
panel of the cabinet) is reserved at the ventilation openings to ensure the normal ventilation. After various cables have
been connected, they should be arranged into bundles or placed on the cable management bracket to avoid blocking the
air intake. Dust the device every three months to avoid blocking the ventilation openings.
Temperature and Humidity Requirements
To ensure the normal operation and prolong the service life of RG-S2600E series, you should keep proper temperature
and humidity in the equipment room.
If the equipment room has temperature and humidity that do not meet the requirements for a long time, the equipment
may be damaged.
