Powering Cabling for PD
PoE designed for the RG-S2628G-P V2.XX complies with 802.3af and 802.3at standards. The RG-S2628G-P V2.XX
adopts the Alternative B for power supplying, namely using the spare pair cables in the standard Ethernet interface for
power supply instead of using isolation transformer in the data pair cables. Therefore, the standard network cables of Cat5
or better must be used in the actual cabling. The non-standard four-wire cables cannot be used, or else, normal powering
to PD will fail.
The actual cabling for the RG-S2628G-P V2.XX with non-standard four-wire cables may lead to failure of powering to
PD.
LED Indicators
Indicator
Panel
Identification
Status
Meaning
Solid green
The port indicator indicates the switching
status.
PoE/switching mode
indicator
PoE
Solid yellow
The port indicator indicates the PoE power
supply status.
Off
The switch is NOT receiving power.
Blinking green
Initialization is in progress. Continuous blinking
indicates errors.
Solid green
The switch is operational.
Solid yellow
The switch gets a temperature warning. Check
the operating environment of the switch.
Status indicator
Status
Solid red
The switch is faulty.
Off
The port is NOT connected.
Solid green
The port is connected at 100Mbps.
10/100Mbps RJ-45 port
indicator
1~24
Blinking green
The port is transmitting or receiving data at
100Mbps.
